Chromoly Steel Spindle (SPL)

Installation Video

Replacement spindle with bearings, nylon locking nut, reusable thread locker, and Oring included. When installing you must apply a Permanent thread locker before installing a new spindle to the mount. This will provide an extra safety step to help keep the spindle from backing off due to vibration. Any name-brand permanent thread locker will do the trick. Make sure you check the spindle on a regular basis. Vibration and impact can cause threads to loosen. Since we use high-strength thread lockers when installing our spindles during assembly. You will need to apply heat to the base of the spindle when trying to remove the spindle. This will help release the bond on the threads.

*IMPORTANT*The Nylon lock nut torque spec is 2 ft/lbs (hand tight) Use an 8mm socket. Once to feel it bottom out stop tightening and visually inspect to make sure the nylon in the nut has engaged with the last couple of threads on the spindle. Over-torquing/tightening will cause the threads to strip and fail.